Waves PuigChild 660 Specifications download pdf (Page 11)

Connecting the PuigChild

Main Power Supply: 100, 120, 220 or 240 volt selectable

PLEASE NOTE: THE POWER SUPPLY IS NOT AUTO-SWITCHING!

You must make sure the voltage rating shown on the back panel of your PuigChild is appropriate

for your power connection.

The power cable socket and fuse-holder with voltage selector are located together on the

back panel of the PuigChild. Plug the supplied cable into the back of the PuigChild and into

your power connection. Switch on the PuigChild using the on/o power switch located on the

front panel. When you switch the power on, the front panel LED displays will illuminate.

Replacing the Fuse

If the fuse blows, switch o the power and unplug the unit. Pull o the fuse holder (see diagram

above) and replace the fuse. Do not forget to replace it with the proper voltage selection

indicated!

We suggest using the following UL listed (slow-blow) fuses:

• For 100/120 V, use a 200 mA fuse

• For 220/240 V, use a 100 mA fuse

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

No comments

Waves PuigChild 660 Specifications Page 11